This is a rebuild service. You will need to ship your old power steering box to us. We then rebuild the steering box and ship it back to you.
Cores must be rebuildable.
Ship power steering gears to:
704 E Lincoln Way
Ames Iowa, 50010
Cases get full machine shop attention. They are honed, trued and sleeved if required. O.E. spool valves are completely dis-assembled, inspected, modified with proper T-bar, reassembled and tested for proper flow balance. All reconditioned components are inspected for wear, and are magnafluxed to find cracks that are not normally visible.
Allow 1-2 weeks for delivery.
How to confirm which box you have:
If an 11/16" 12 point box end wrench fits snug on the splines of the steering box input shaft then youhave a '78-'80 Scout II box and need a3/4"x30 steering joint.
If an 11/16" 12 point box end wrenchdoes notfit over the splines of the steering box input shaft then you have a '71-'77 Scout II box and need a13/16" x 36 steering joint.Or if you have calipers, the measurement on the input splines of the steering box should be 0.80 inches in diameter.
Please note: DOES NOT INCLUDE PITMAN ARM. Do not send in your pitman arm.
1x rebuilt steering box
You might need:
Get on the list!
If you want to know about new product alerts, special sales, coupon codes, and other cool stuff then enter your e-mail below. We promise not to overload your inbox with too much Scout stuff - is that even a thing?